Product ID:MA 562 CORE SPLICE ADHESIVE
MSDS Date:12/18/1991
FSC:8040
NIIN:00-185-5631
MSDS Number: BPYDV

Emergency Phone: 203-564-4046

Info Phone: 203-564-4046

Cage: 5X358

Telephone: 330-374-2786 / 330-374-2900

Cage: 1HS43

MIXTURE OF EPOXY RESINS

CYANOGUANIDINE AND OTHER HARDENERS

BLOWING AGENT

OSHA HAS GIVEN CONSIDERATION TO CHEM INFO THAT CHEMICAL

RTECS: 9999999ZZ

LD50 LC50 Mixture:LD50: 1000 MG/KG RAT.
Routes of Entry: Inhalation:NO Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:CHRONIC CONDITIONS MAY RESULT FROM
CONTINUOUS HANDLING WITHOUT GLOVES.
Effects of Overexposure:POSSIBLE MINOR SKIN IRRITATION.
Medical Cond Aggravated by Exposure:SKIN SENSITIVITY.

First Aid:EYES: FLUSH EYES WITH WATER AND GET MEDICAL ATTENTION IF
NECESSARY. SKIN: WASH SKIN WITH SOAP AND WATER. REMOVE CONTAMINATED
CLOTHING AND WASH. INGESTION: CALL A PHYSICIAN IMMEDIATELY.

Flash Point Method:CC
Flash Point:200F,93C
Extinguishing Media:FOAM, CO2, DRY CHEMICAL
Fire Fighting Procedures:FIREFIGHTERS SHOULD BE EQUIPPED WITH
SELF-CONTAINED BREATHING APPARATUS, CUFFED RUBBER GLOVES AND RUBBER
BOOTS.
Unusual Fire/Explosion Hazard:NO UNUSUAL FIRE OR EXPLOSION HAZARDS
EXIST.

Spill Release Procedures:N/A--FILM ADHESIVE

Handling and Storage Precautions:STORE AT 0 F OR BELOW IN SEALED
CONTAINERS FOR MAXIMUM STORAGE LIFE.
Other Precautions:KEEP AWAY FROM HEAT AND OPEN FLAME.

Ventilation:NORMAL VENT OK.
Protective Gloves:COTTON, RUBBER
Eye Protection:NOT NEEDED USE GOGGLES *
Other Protective Equipment:CLEAN LONG SLEEVED AND LONG LEG CLOTHING.
* USE GOGGLES WHEN MACHINING CURED PRODUCT.
Work Hygienic Practices:NORMAL GOOD INDUSTRIAL HOUSEKEEPING.
Supplemental Safety and Health

HCC:N1
Boiling Pt:B.P. Text:DECOMPOSES
Melt/Freeze Pt:M.P/F.P Text: 122F, 50C
Spec Gravity:1.1
Solubility in Water:NONE
Appearance and Odor:YELLOW FILM WITH NO NOTICEABLE ODOR.

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS, BASES, STRONG OXIDIZERS.
Stability Condition to Avoid:NO SPECIFIC CONDITIONS TO AVOID EXCEPT
THOSE NOTED BELOW.
Hazardous Decomposition Products:OXIDES OF CARBON, UNIDENTIFIABLE
ORGANIC FUMES WHICH MAY BE TOXIC.
Conditions to Avoid Polymerization:SOURCES OF INTENSE HEAT NEAR STORED
MATERIAL.

Waste Disposal Methods:BURY IN AN APPROVED LANDFILL OR INCINERATE IN
ACCORDANCE WITH FEDERAL AND STATE REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.